Case Study
Lafayette School Corporation in Lafayette, Indiana
- 1 BridgeWave AR80X 1000 Mbps GigE licensed solution for tower to tower back-haul.
- 11 NERA Access IP, 100 Mbps full-duplex licensed bridge links for school connectivity thought-out the district.
- 100 Mbps Fast Ethernet full-duplex to 11 schools for under $290,000 Total cost, with a 3-year warranty.
- Equates to a $263-dollar to 1 Mbps solution with 99.999% reliability.
Microwave Engineering – Microwave & RF Network Design
What makes our equipment solutions better than others? Engineering is the match of the need with equipment solutions that not only does the job well, but offers years of continuous service while taking in account customer budget constraints. Allow us to help with -
- Microwave Path Profile Design
- Communication System Design, Including Transmission Lines, Antennas and Network & Security Integration
- RF Spectrum Analysis
- Equipment Selection Process
- Frequency Integration
- Tower and Loading Design
- Aerial Path Profile Surveys
Our process starts with top-level transmission profile engineering with up-to-date, 2-meter resolution ground bounce radar mapping data. Most estimating can be done with our computer software designed for point-to-point microwave transmission networks.
Details of the microwave paths are further enhanced with high-resolution satellite photos showing us foliage and buildings. This allows us to do computer-aided desktop engineering and estimating for a remote area.
Spectrum analysis gives a visual of radio frequency in the air. Interference problems can be identified with the use of a spectrum analyzer from 10 kHz to 26 GHz. Site planning can be accomplished allowing accurate frequency selection in dense radio and microwave congested areas.
References
Heartland Business Systems – Installed by CommConnect, a 4.1-mile, 54Mbps wireless wide area network consisting of Tsunami QuickBridge 60 technology, project included an installed 100′ communications tower. Contact Mr. Tim McNicoll, Systems Consultant, Telephone (920) 687-4148 Fax – (920) 788-7739 Customer Quote- “Thanks for all of your help Mark and responding to our needs so quickly. The link seems to be operating very well with high performance.” Paul Vande Ven, Sr. Systems Engineer MCSE, Heartland Business Systems.
Career Education Corporation – Installed by CommConnect a license free Tsunami 480 Gigabit Ethernet bridge system, the ultimate in reliability and speed. This carrier grade 99.999% uptime link enabled office expansion into the Sears and Roebuck building with an aggregate throughput rate that exceeds 870 Mbps. Contact Mr. John Morton, Vice President of Information Technology, Telephone – (847) 851-5150 Fax – (847) 851-6290
Columbus School District – The value of wireless wins again with a wireless wide area network consisting of a point-to- point 54 Mbps Proxim QuickBridge 60 link replacing a pair of aging 900Mhz Persoft bridges. The project included two installed Rohn 25 towers on top of each schools roof to achieve line of sight. Contact Mr. David DeGuire, Director of Technology, Telephone (920) 623-5950 Fax- (920) 623-5958 Customer Quote- “We researched connecting our schools by leasing fiber or dedicated T-1s, or installing a new wireless link. The T-1s would have been not much faster than our current connection and leasing fiber carried both high installation and high monthly costs, so the choice was easy. CommConnect’s solution was thousands less than just the installation cost of the fiber, and since we own the equipment, there are no monthly costs. Moreover, the Proxim connection is 5 times faster than what the fiber solution would have been. Applications that used to take several minutes to load now take only 30 seconds.”
Sheboygan County – Wireless wide area network consisting of twenty point-to-point and multipoint wireless bridges, interconnecting ten buildings and four communications towers. This users of this network benefit from 613 Mbps of total capacity with an average of %99.999+ uptime. The bridges are on an all Ethernet WAN, routed from a single location. Installed by CommConnect, the WAN consists of Cisco / Aironet 802.11 radios, Proxim / Western Multiplex Tsunami point to point & multi-point technology, Tsunami QuickBridge 60 and 60Ghz MMW 100Mbps full-duplex bridges. Contact Mrs. Joyce Schneider, Director of Sheboygan County IS Department, Telephone (920) 459-0335 Fax – (920) 459-0330
Concours Motors – Wireless wide area network consisting of point-to-point Proxim, Tsunami wireless technology, interconnecting two buildings. The solution required a reliable unlicensed microwave link for simultaneous transport of voice using the T1 port and data – 10BaseT. Contact Mr. John LaPin, Information Systems Manager, Telephone (414) 290-1620 Fax – (414) 290-1622 Customer Quote- “The Proxim radio fit our needs precisely. Mark installed the equipment quickly and professionally, all at a reasonable price.” – John LaPin, Information Systems Manager, Concours Motors Inc.
National Park Service – A unique solution providing 16 Mbps aggregate Ethernet capacity within a challenging non line of sight environment. With interconnection of two buildings through a 1/2 mile of dense national forest, our product knowledge shines in goal achieving solutions where it may not work on paper, but we made it work in the air. Contact Mr Donnie Majors, Gulf Islands National Seashore, Information Technology Specialist, Telephone 850-934-2658 Fax – 850-932-9654
Maintenance Services
Other than our standard guarantee, we offer custom maintenance services on equipment installed or maintained by CommConnect.
Contact your sales representative for more information about:
- 24×7 or 8×5 phone support hotline
- 24×7 or 8×5 guaranteed on-site support
- Annual equipment inspection
- Advanced product replacement
- Redundant failover links
- In stock spare equipment for critical links
- Emergency deployment & disaster recovery
Towers & Line of Sight
Wireless microwave products need line of sight. To get your links up and running, deploying a tower or two may be the key to saving money, enabling long distance propagation, and getting the big bandwidth you need. Contact CommConnect for information on line-of-sight requirements.
We offer both freestanding and guyed tower solutions with a full warranty.
Free Space Optics
The line-of-sight 
TereScope 10GE the industry’s first wireless 10 Gigabit Ethernet Free Space Optics system, provides enterprises and service providers with a cost effective and high-bandwidth wireless solution for extending backbone networks between multiple buildings without a need for rights-of-way or a fiber-optic cable plant. The TereScope® TS10GE provides ultra high-speed Free Space Optics (FSO) connectivity. Operating at data rates of 10 Gigabit, TereScope® TS10GE systems are deployable rapidly, providing maximum bandwidth FSO optical wireless connectivity.
High Performance FSO Systems from CommConnect
Canon’s new Canobeam DT-100 Series optical transceivers build on the outstanding functionality of previous models, employing design innovations that contribute to both reduced size and greater cost performance. Featuring a compact optical module which integrates key optical components in one tidy unit and operates protocol independent, like fiber optic cable. The models utilize advanced engineering to realize size and weight reductions of up to 50% from previous models.
The units are available in several fiber or twisted pair configurations, including Multi-mode (MM), Single-mode (SM) or twisted pair (TP).
Fifteen years of Canon’s free space optics (FSO) engineering expertise is now available in their new DT-100 Series Canobeam, the highly versatile optical beam transmission system. The fourth generation of Canon’s point-to-point optical beam transceivers features:
- Built-In Auto Tracking on Three New Models
- High speed transmission up to 1.25Gbps
- Optimized Size and Weight
- Highly Secure Data Link
- Protocol independent, like fiber optic cable
- No FCC Licensing or Radio Frequency
- Sleek design engineered with minimal space requirements.
- Affordable Price Without Compromise
- The DT-100 Series can withstand temperatures from -20 C to +50 C, wind gusts of up to 134 mph, and features a Weather-hardened outer shell IEC-rated for permanent outdoor use.
- Available in several fiber (MM: Multi-mode, SM: Single-mode) configurations. DT-110 and DT-120 also available in twisted pair (TP) configurations.
- DT-130 also available in MM and MM/SM configurations
The TereScope™ family of Free Space Optics products provides low-cost, high-speed wireless connectivity in a number of last mile applications. Operating at data rates of 1.5 Mbps to 1,250 Mbps (1.25 Gbps or GigE), TereScope™ solutions provide scalable, wireless alternatives to leased lines. Additionally, TereScope systems can be deployed, on a rooftop or indoors behind a window, in one day, without requiring right-of-way or government permits to install.
A view from the TereScope TS3000G with GigE or Gigabit (1000+ Mbps) capacity! Allow CommConnect to determine which short-haul, high bandwidth FSO solution is right for your application.
What is FSO?
Free-Space Optics (FSO) is a line-of-sight technology that uses lasers to provide optical bandwidth connections. Currently, FSO is capable of up to 2.5 Gbps of data, voice and video communications through the air, allowing optical connectivity without requiring fiber optic cable or securing spectrum licenses. FSO requires light, which can be focused by using either light emitting diodes (LEDs) or lasers (light amplification by stimulated emission of radiation). The use of lasers is a simple concept similar to optical transmissions using fiber optic cables; the only difference is the medium. Light travels through air faster than it does through glass, so it is fair to classify FSO as optical communications at the speed of light. FSO technology is relatively simple. It’s based on connectivity between FSO units, each consisting of an optical transceiver with a laser transmitter and a receiver to provide full duplex (bidirectional) capability. Each FSO unit uses a high-power optical source (i.e. laser), plus a lens that transmits light through the atmosphere to another lens receiving the information. The receiving lens connects to a high-sensitivity receiver via optical fiber. FSO technology requires no spectrum licensing. FSO is easily upgradeable, and its open interfaces support equipment from a variety of vendors, which helps service providers protect their investment in embedded telecommunications infrastructures.
History of FSO
Originally used by the military and NASA, FSO has been used for more than 30 years to provide fast communication links in remote locations. Recent advances in FSO technology have opened up mainstream communications uses, from short-term solutions for short distance network bridges to an attractive and viable alternative for service providers to deliver the promise of all-optical networks. As an optical technology, FSO is a natural extension of the metro optical network core, bringing cost-effective, reliable and fast optical capacity to the network’s edge.
While fiber optic communication has gained acceptance in the telecommunications industry, FSO communication is still relatively new. FSO enables similar bandwidth transmission abilities as fiber optics, using similar optical transmitters and receivers and even enabling WDM-like technologies to operate through free space.
Non-Line-of-Sight Microwave Bridges
You have researched wireless for your network. You believe it is the best technology choice for your high capacity needs, but you don’t have line of sight to your facilities. Allow our experienced experts engineer a NLOS solution that exceeds your bandwidth expectations, while staying within budgetary guidelines.
Motorola Point-to-Point (PTP) Wireless Ethernet Bridges
This series of 2.5 and 4.5, 5.4, and 5.8 GHz wireless Ethernet bridges provide more range and speed in near- and non-line-of-sight (nLOS and NLOS) environments, delivering carrier grade reliability. PTP 600 links have class-leading sensitivity and power output which enable the links to go farther regardless of conditions. With data rates up to 300 Mbps, this series of wireless bridges provide throughput connectivity in some of the most challenging environments.
 Motorola 600 PTP SeriesPoint-to-Point wireless Ethernet bridges operating in the 2.5, 4.5, 5.4 and 5.8 GHz bands at speeds up to 300 Mbps. FIPS 140-2 Certified.
|
 Motorola 500 PTP SeriesPoint-to-Point wireless Ethernet bridges operating in the 5.4 and 5.8 GHz bands at speeds up to 105 Mbps. |
 Motorola 400 PTP SeriesPoint-to-Point wireless Ethernet bridges operating in the 4.9, 5.4 and 5.8 GHz bands at speeds up to 43 Mbps. |
 Motorola 300 PTP SeriesPoint-to-Point wireless Ethernet bridges operating in the 5.4 and 5.8 GHz bands at speeds up to 25 Mbps. |
Cambium Networks’ Point to Point (PTP) radio solutions are providing award-winning network performance in licensed, unlicensed and defined use frequency bands. These include specific FIPS 140-2 solutions for the U.S. Federal market. Based on breakthrough Orthogonal Frequency Division Multiplexing (OFDM) technology, Cambium Networks’ PTP solutions deliver exceptional near-line-of-sight (nLOS) and non-line-of-sight (NLOS) coverage in locations where foliage, tall buildings or other obstructions limit wireless broadband access. Our PTP solutions are ruggedized for 99.999% reliability to deliver exceptional performance at the most extreme temperatures and under the most difficult weather conditions. Our PTP networks deliver the speeds to support today’s in-demand bandwidth-intensive solutions, including high-speed residential and business access, streaming video and VoIP.
Cambium Networks nLOS and NLOS PTP Product Portfolio
| Spectrum | Unlicensed | Unlicensed | Licensed & Unlicensed |
| Model | PTP 300 | PTP500 | PTP 600 |
| Design Focus | High Performance | High Performance | High Performance |
| Useable Throughput | 25 Mbps | 105 Mbps | 300 Mbps |
| Key Features | Orthogon IDFS | Orthogon IDFS | Orthogon IDFS |
| Adaptive Modulation | Adaptive Modulation | Adaptive Modulation | |
| PTP Synch | PTP Synch | PTP Synch | |
| T1/E1 | T1/E1 | 2 x T1/E1 | |
FIPS Secure |
*Motorola Solutions is now Cambium Networks
OFDM is state-of-the-art technology for multi-path and non-line-of-sight environments. We choose the best products to make your non line of sight links a reality. Let our experts engineer the right NLOS solution for your challenging link paths. Wireless Ethernet & T-1 combined NLOS solutions are available for both your data and voice transport applications.
SkyWay-XL250 Series
5 GHZ 250 MBPS 2X2 (dual polarity) MIMO PTP System
128-bit AES Encryption Standard
KEY FEATURES:
• 2×2 MIMO OFDM Radio Technology
• 250 Mbps Actual Throughput for large bandwidth applications.
• High radio output power (400mW, 26 dBm) – extended coverage.
• Optimized for long distance connectivity
• Gigabit Ethernet Port
• Adaptive Coding and Modulation (ACM)
• Built-in Spectrum Analyzer
• Audio Tone Antenna Alignment Tool
• Wide Frequency range from 4.90 to 6.0 GHz.
• HyperARQtm — Preserve system performance out to long distance
SkyWay Excel 4.9GHz Public Safety Datasheet
Gigabit Wireless – Wireless Backhaul – Fixed Wireless Broadband
Licensed Full Duplex Microwave – Ethernet & GigE solutions
The Benefits – You are guaranteed by law not to get interference. We warranty the bitrate on project work for one full year. Extra warranties and full redundancy star and ring topologies are available. These are solid, 99.999% uptime, carrier grade, scalable modulation, line of sight technologies. We provide you with the needed FCC radio license for a turnkey project solution.
- Standard one-year guarantee on the link performance as engineered
- Solutions for mixed data & voice transmission networks
- 4.9 GHz public safety solutions up to 108 Mbps half duplex.
Take advantage of secure FCC licensed 80 GHz radio frequency at GigE and Fast Ethernet speeds with the advantage of add/drop data ports, and optional wire-speed AES encryption built in. BridgeWave is a leader in MMW technology with some models available with advanced 256-AES FIPS certified security.
| 80 GHz Wireless | Description | Distance | Capacity | Encryption Option | |
 |
BW80 |
80 GHz Fast Ethernet extended range wireless bridge | Up to 4 Miles(6.4KM) | 125Mbps Upgrade to Gig-E |
None |
 |
BW80x |
80 GHz Fast Ethernet extended range wireless bridge | Up to 5 Miles(8.0KM) | 125Mbps Upgrade to Gig-E |
None |
|
FE80u |
80 GHz Fast Ethernet medium range wireless bridge | Up to 5 miles(8 km) | 100 Mbps | None |
|
FE80xu |
80 GHz Fast Ethernet medium range wireless bridge | Up to 6 miles(9.7 km) | 100 Mbps | None |
|
GE80 |
80 GHz Fast Ethernet medium range wireless bridge | Up to 4 miles(6.4 km) | 1000 Mbps | None |
|
GE80x |
80 GHz Fast Ethernet medium range wireless bridge | Up to 5 miles(8 km) | 1000 Mbps | None |
|
AR80 |
80 GHz AdaptRate 100/1000 Mbps extended range wireless bridge | Up to 5 miles(8 km) | 100/1000 Mbps |  |
|
AR80x |
80 GHz AdaptRate 100/1000 Mbps extended range wireless bridge | Up to 6 miles(9.7 km) | 100/1000 Mbps | |
BridgeWave’s solutions meet the following stringent regulatory requirements:
- Safety: UL Listed, CE Mark, FCC 1.1310 general population RF MPE limits
- RF Certifications: U.S. FCC Part 15.255, Industry Canada RSS-210
- Other: RoHS, WEEE, ETS 300 489, FIPS certified, JF-12
 |
FlexPort 80 BridgeWave’s FlexPort® platform of high capacity radio systems smoothly enables this transition by carrying both TDM and IP traffic natively without the mandate for pseudowire or other third party devices. With the use of a single radio, operators can combine their 4G backhaul needs with their existing backhaul networks resulting in an extremely cost effective and easy to manage solution. By providing proven reliability and performance, capacity up to 1.5 Gbps over a single RF carrier and operation in the uncluttered 80 GHz band, BridgeWave’s “future-proof” FlexPort solution delivers on the promise of cost-effective, scalable backhaul for migration to 4G networks at an operator’s own pace. |
| |
FlexPort uWave BridgeWave’s FlexPort® uWave in the 18 GHz and 23 GHz microwave radio systems have been designed specifically to meet the requirements of operators, carriers, and service providers requiring full-rate gigabit connectivity in a single, compact, all-outdoor enclosure. The FlexPort® uWave accomplish this through an innovative approach in aggregating multiple RF channels without the need for additional hardware as with other lower licensed frequency band products. This helps ease installation and maintenance costs on the network by offering only one device to install and manage, providing the user with a highly-reliable, fully integrated backhaul solution. |
The FibeAir IP-10C is Ceragon’s next generation carrier-grade wireless Ethernet solutions family. With up to 1 Gbps per radio carrier and combining IP and TDM networking, FibeAir IP-10 offers risk-free migration with the highest possible capacities at the lowest overall cost – addressing any deployment scenario.
- TDM & Ethernet interfaces
- Modular nodal architecture
- Integrated TDM cross-connect
- Integrated Ethernet switch
- 10-500 Mbps to 1 Gbps per radio carrier
- 10-80 MHz channel bandwidth
- 6-38 GHz licensed frequency
- Highest spectral efficiency
- Adaptive Coding & Modulation (ACM)
- Native Ethernet and TDM (Native)
- Seamless scalability
- MEF-9 & MEF-14 certified
Cielo SkyLink 6-39 GHz Microwave Solutions
Cielo Networks SkyLink CG point-to-point microwave radios are available in all FCC/NTIA & ETSI licensed bands from 6 to 39 GHz. SkyLink terminals have a “split mount” configuration with an Outdoor Unit (ODU) mounted directly to the antenna, an Indoor Unit (IDU) mounted inside a structure or outdoor weatherproof cabinet, and a single inexpensive coaxial cable connecting those units. The SkyLink system uses advanced software defined radio technology to optimize link bandwidth scalability, payload interface options, RF operating parameter flexibility, and in-service QOS. Specifically, SkyLink terminals are software key configurable for capacities ranging from 20 Mbps to 600 Mbps. Set capacity is modularly allocated to Fast Ethernet and/or Gigabit Ethernet IP ports, TDM circuits from 2 x T1/E1 to 63 x T1/E1 and/or 1 x OC-3/STM-1 to 2 x OC-3/STM-1, and a variety of IP + TDM modes. 1+1 hot standby (HSB) & 2+0 E/W & E/E configurations are also supported.
SKYLINK CG COMPACT SPLIT MOUNT SYSTEM
Commconnect partners with Cielo Networks to provide disaster recovery solution in less than 72 hours:
http://www.cielonetworks.com/site/testimonials/82-commconnect-llc.html
*NEW* Horizon Harmony Converged Packet Microwave
The Dragonwave Horizon Harmony split-mount system achieves significant efficiencies by converging TDM, ATM, Frame Relay, IP and Ethernet traffic onto a single packet-based transport layer and a single management plane. This results in simplified operations, reduced capital cost and significant savings in total cost of ownership; all while meeting the most stringent network requirements for highly time-sensitive applications.
Horizon Quantum
With 2 to 4 Gbps per link, Dragonwave Horizon Quantum delivers the next generation in packet microwave technology. Quantum is a step change in capacity, nodal intelligence, spectral efficiency and operational simplicity; all while occupying only half a rack unit and consuming the lowest power per bit of any solution today. As a result, operators can stay thin in the air and in the rack as they launch new IP-based services. As the next evolution of DragonWave’s split-mount radio, Quantum offers a seamless upgrade path for existing Duo and AirPair deployments.
Horizon Compact Wireless Ethernet
The road to wireless Ethernet is faster than you think. The Dragonwave Horizon Compact offers service providers a resilient, high performance backhaul network solution. At 800 Mbps, Horizon Compact next-generation, Ethernet microwave transmission system offers unparalleled capacity and reliability for today with the built-in flexibility and scalability service providers need for the future.
*Commconnect services and supports all existing Dragonwave deployments, including AirPair 50, 100, and 200 systems.
Exalt ExtremeAir™ Licensed FCC 11–23 GHz Systems
“Fiber-Speed Microwave Systems for Ring, Aggregation and Core Applications”
ExtremeAir all-outdoor radios are the world’s first ultra-high capacity dual-carrier, zero footprint microwave systems. Capable of operation in the 11 – 23 GHz bands, ExtremeAir is designed to deliver guaranteed full-duplex Ethernet throughput as high as 1000 Mbps over a distance of 24 miles. These all-outdoor microwave systems are rugged, XPIC-enabled, tower-mounted radios requiring no cabinet space. ExtremeAir provides a true line speed, low cost alternative to fiber for high capacity ring, aggregation and core applications in LTE, WiMAX and wireline service provider networks as well as campus connectivity and video surveillance applications in enterprise and government networks.
Commconnect carries and supports all Exalt Extreme Air Models, including:
rc11200 / rc11205 / rc11220 / rc11230 / rc11210
rc18200 / rc18205 / rc18220 / rc18230 / rc18210
rc23200 / rc23205 / rc23220 / rc23230 / rc23210
Unlicensed Microwave Data Communications
BridgeWave 60 GHz wireless Ethernet bridges provide wireless gigabit performance with robust wireless network security features. BridgeWave wireless bridges offer a cost-effective alternative to fiber-based network solutions for metro Ethernet applications.
BridgeWave AR60 / AR60x Datasheet
KEY FEATURES OF 60 GHZ WIRELESS POINT-TO-POINT BRIDGES
Performance:
- License-free operation in the U.S. and Canada
- Highly secure, narrow antenna beamwidths
- Interference-free operation, enabling high-density deployments
- Full rate, full duplex, Gigabit or Fast Ethernet
- AdaptRate™ and AdaptPath™ switching overcomes rain fades
- Low latency for fiber-equivalent performance
- Forward Error Correction yields maximum link range
- Add/Drop Ports
Reliability:
- Rigorous HALT/HASS testing
- Up to 99.999% availability; 28-Year MTBF
Ease-of-Use:
- Connects directly to standard network equipment
- All-outdoor, compact design
- Low voltage power cabling
- Rapid & flexible deployment
- Embedded web and SNMP based network
management agent
Regulatory Compliance:
- Safety: UL Listed, CE Mark, FCC 1.1310 general population RF MPE limits
- RF Certifications: U.S. FCC Part 15.255, Industry Canada RSS-210
- Other: RoHS, WEEE, ETS 300 489, FIPS certified, JF-12
ADVANCED WIRELESS NETWORK SECURITY OPTIONS FOR 60 GHZ WIRELESS BRIGDES
BridgeWave’s Advanced Security Options add another layer of data protection to BridgeWave’s inherently secure wireless links, providing the most secure gigabit wireless solutions available.
BridgeWave’s Advanced Security Datasheet
 |
Advanced Encryption Standard (AES): Available on AR60 and AR60Xmodels.
|
 |
Secure Management:
|
Solectek SkyWay 250 Series 5GHz PTP Wireless Solution
CommConnect is proud to offer the latest point-to-point wireless bridge solution from Solectek. The SkyWay 250 series is a cost effective, industry leading, unlicensed 5GHz radio system. The bridge offers a wide spectrum; allowing for low-risk and high performance in unlicensed deployment scenarios. With 2×2 MIMO OFDM radio technology (dual polarity antennas), 128-bit AES built-in, and throughput speeds up to 250 Mbps, these radios offer industry leading bandwidth combined with best in class security and reliability. The SkyWay 250 is ideal for rapid deployment, disaster recovery, and as a long term fixed wireless solution for all high bandwidth, broadband backhaul applications.
SkyWay-XL250 Series
5 GHZ 250MBPS 2X2 MIMO PTP KIT
KEY FEATURES:
• 2×2 MIMO OFDM Radio Technology
• 250 Mbps Actual Throughput for large bandwidth applications.
• High radio output power (400mW, 26 dBm) – extended coverage.
• Optimized for long distance connectivity
• Gigabit Ethernet Port
• Adaptive Coding and Modulation (ACM)
• Built-in Spectrum Analyzer
• Audio Tone Antenna Alignment Tool
• Wide Frequency range from 4.90 to 6.0 GHz.
• HyperARQtm — Preserve system performance out to long distance
SkyWay Excel 4.9GHz Public Safety Datasheet
Contact Us
Mailing Address
PO Box 522
Cedarburg, WI 53012
Shipping Address
N63 W5821 Columbia Rd.
Cedarburg, WI 53012
Phone: 262-375-2004
Fax: 262-364-2629
